|
AMIL Fees
 The
AURIF-AMIL User Fee Schedule is provided as a reference to the services
available through this facility and their respective costs. Prices are subject
to change without notice.
The AURIF-AMILis open from 7:45am until 4:45pm (M-F) but other times are
available by prior arrangement with the Director. Those who have not used the
facility recently, or have never been here are invited to stop by or schedule an
appointment to discuss the details of your specific microscopy needs. Samples
are accepted by pre-arrangement only. Self-service use of the facility is
welcome any time and is highly encouraged. Most time and resources are devoted
to Auburn University projects but, as time permits, a limited number of projects
from outside the Auburn University System can be conducted. You may contact Dr.
Michael E. Miller at (334) 844-1654 or 1640, fax him at (334) 844-1645, or
e-mail him at
millem1@mail.auburn.edu for more information about
our services or about setting up an internal account with this facility.
AURIF-AMIL Mission
The mission of the Advanced Microscopy & Imaging
Laboratory is to (1) provide state-of-the-art research support, consultation,
and resources for studies involving the fine structure of cells and tissue, and
non-biological materials using transmission and scanning electron microscopy,
light microscopy, and image analysis; (2) educate and train faculty, students,
staff, and postdoctorates in the theories and techniques of modern electron and
light microscopy; (3) focus attention on the research mission and capabilities
of the facility by highlighting activities through tours and workshops to
Alabama schools, University classes, extension groups, research institutions,
industry, and civic organizations; and (4) provide electron and light microscopy
services to users within and outside the University system on a fee basis.
|
EQUIPMENT |
AU |
Non-AU |
|
Self Use |
Assisted Use |
Self Use |
Assisted Use |
| Zeiss EM 10 TEM |
$40/hour |
$80/hour |
$170/hour |
$225/hour |
| Zeiss DSM 940 SEM |
$40/hour |
$80/hour |
$170/hour |
$225/hour |
| SEM X-Ray |
$45/hour |
$85/hour |
$190/hour |
$230/hour |
| BioRad Confocal |
$30/hour |
$75/hour |
$150/hour |
$210/hour |
| Confocal Computer (only) |
$3/hour |
$45/hour |
$6/hour |
$70/hour |
| Zeiss Axiovert 200 LM |
$6/hour |
$50/hour |
$18/hour |
$70/hour |
| Sorval MT2 Microtome |
No Charge |
$45/hour |
$2/hour |
$70/hour |
| Leica Ultracut T Microtome |
$6/hour |
$55/hour |
$12/hour |
$70/hour |
| Critical Point Drier |
$10/run |
$55/run |
$20/run |
$70/run |
| Sputter Coating Device |
$10/run |
$20/run |
$20/run |
$45/run |
| Vacuum Evaporator |
$10/run |
$45/run |
$20/run |
$60/run |
| SUPPLIES |
AU |
Non-AU |
| TEM Sheet Film (Kodak 4489) |
$1.50 each |
$2.00 each |
| SEM Sheet Film (Kodak 4127 or T-Max) |
$2.25 each |
$3.00 each |
| Polaroid Type 55 Film |
$3.50 each |
$4.00 |
| Liquid Nitrogen |
$3.00/liter |
$3.00/liter |
| Osmium tetroxide, 2ml, 4% |
$6.50/vial |
$6.50/vial |
| Carbon Stubs |
$1.50 each |
$1.50 each |
| SERVICES |
AU |
Non-AU |
| TEM Self User Project Fee (includes
use of buffers, primary fixatives, alcohols, resin, grids and stain for
up to 5 specimens; OsO4 not included in fee) |
$20.00 |
$35.00 |
| SEM Self User Project Fee (includes
use of buffers, primary fixative, adhesives, and up to 5 aluminum
specimen support stubs; OsO4 not included in fee) |
$10.00 |
$20.00 |
| TEM Chemical Fixation - Please note,
fixation is carried out up to and including embedding (10 blocks max.).
Cost includes supplies and technical assistance. |
|
|
|
1st sample |
$100.00 |
$150.00 |
|
each additional sample |
$30 each |
$40 each |
| TEM Sectioning - Standard |
|
|
|
Thick Sections (2-10 micron) |
$12/block |
$20/block |
|
Thin Sections (incl. staining) |
$60/block |
$90/block |
|
Additional Thin Sections |
$6/grid |
$9/grid |
| TEM Sectioning - Immuno (Please note
- these samples are considered on a case-by-case basis after
consultation with the Director. For these types of samples, services may
be charged on an hourly basis depending on type of sample and the time
required for processing) |
|
|
|
Thick Sections (2-10 micron) |
$12/block |
$20/block |
|
Thin Sections (incl. staining) |
$70/block |
$95/block |
|
Additional Thin Sections |
$8/grid |
$12/grid |
| Negative Staining |
$45/hour |
$75/hour |
| SEM Chemical Fixation |
|
|
|
1st sample |
$60 |
$95 |
|
each additional sample |
$12 |
$25 |
| Technician Time |
$45/hour |
$70/hour |
| Rush Fee |
$50/hour |
$75/hour |
| Darkroom Custom Work |
|
|
|
Custom print from EM negative 1st print (up to 8x10) |
$6.00 |
$12.00 |
|
Additional prints, same negative |
$3.00 |
$6.00 |
| Digital Prints (up to
8x10) |
$4.00 |
$8.00 |
| 
