OIT Home

Meridian 9316 Quick Sheet

 

PROGRAMMING YOUR PHONE

  • With the handset in the cradle, press SAVE.
  • Press the AutoDial button you are programming.
  • Dial the telephone number or feature code exactly as you would normally dial it (4-XXXX or 9-XXX-XXXX).
  • Press SAVE a second time.
  • Follow the instructions on the digital display to assign a name to the AutoDial button.
    OR, press SAVE a third time.

AUTODIAL buttons are programmed by the user.

 

AutoDial

  • Program the AUTODIAL buttons following the instructions above.
  • Lift the handset and press the programmed AUTODIAL button.

Call Forward

*71 to activate
#71 to cancel

  • Lift the handset and dial *71.
  • After tone, dial the number you wish to forward your calls to and hang up. (Calls can be forwarded to on-campus extensions only.)

To cancel: Lift the handset and dial #71.


TIP: For convenience, program this feature to an AUTODIAL button.


Last Number Redial

  • Lift the handset and press the REDIAL button or ##.

Call Pickup

*73

  • Lift the handset and dial *73.
  • You will intercept a call coming into another phone in your Call Pickup Group.

TIP: If more than one line in the group is ringing, you will intercept the one that began to ring first.

Note: This feature must be set up through the OIT HelpDesk.


Intercom

  • Pick up the handset and press the button marked Intercom (I/C) or Group Intercom (GIC).
  • Dial the two-digit intercom number.

Ring Again

*75 to activate
#75 to cancel

  • After getting busy signal, hang up.
  • Lift handset & dial *75.
  • Wait for the recording, then hang up.
  • Repeat Dialing will monitor the line for 30 minutes.
  • A distinctive ring lets you know when the line you were calling is free.

TO CANCEL Repeat Dialing

  • Dial #75.
  • Repeat dialing will cancel automatically after 30 minutes.

TIP: Repeat Dialing can monitor more than one line at a time.


This will not work for telephone registration.


Speed Call (Program Long, Program Short)

*77 (Speed Call Individual)
*78 (Speed Call Long)

Note: Feature must be set up through the OIT HelpDesk.

TO PROGRAM SPEED CALL:

  • Lift the handset and dial *77 (for Speed Call Individual) or *78 (for Speed Call Long).
  • After the tone, dial a one-digit code (0-9) for Speed Call Short or a two-digit code (00-29) for Long.
  • Dial the phone number, exactly as you would normally dial it (4-XXXX or 9-XXX-XXXX). Press the # key. After the tone, the number has been saved and you can hang up.

TO USE SPEED CALL:

  • Lift the handset and press *, followed by the one or two-digit code.

Call Trace

*57

  • Immediately after receiving a harassing phone call, hang up.
  • Before receiving another incoming call, lift handset, dial *57.

NOTE: CALL TRACE is for harassing or threatening calls only. A police report must be filed

 

Dialing Instructions

Emergency 911
Auburn Police Department
(Non-Emergency)		 9 + 501-3100
Off Campus 9 + Number
Long Distance *76 + Authorization Code + 9 + 1 + Area Code + Number
Local Information *76 + Authorization Code + 9 + 1 + 411
Long Distance Information *76 + Authorization Code + 9 + 1 + Area Code + 555 + 1212
Voice Mail Access     4-1000 on campus
844-1000 off campus

 

International Calls

Direct *76 + Authorization Code + 9 + 011 + Country Code + City Code + Number
Operator Assisted - AU Calling Card only
(by AU operator only)		 9 + 01 + Country + City + Number

Last Updated: Jan. 22, 2011