Meridian 9316 Reference Guide
PROGRAMMING YOUR PHONE
AUTODIAL buttons must be programmed by the user. |
AutoDial
- Program the AUTODIAL buttons following the instructions above.
- Lift the handset and press the programmed AUTODIAL button.
Call Forward
*71 to activate
#71
to cancel
- Lift the handset and dial *71.
- After tone, dial the number you wish to forward your calls
to and hang up. (Calls can be forwarded to on-campus extensions
only.)
To cancel: Lift the handset and dial #71.
TIP: For convenience, program this feature to an AUTODIAL button.
Calling Number Delivery Blocking
*67
� Dial *67, then place your call.TIP: You must follow the directions each time you wish to block your number. If the party you are calling has Anonymous Call Rejection your call will not go through.
Hold
- With the caller on the line, press HOLD.
- To return to the caller, press the line button (the line
the caller is on).
Last
Number Redial
- Lift the handset and press the REDIAL button or ##.
Transfer/Three Way Call
- With the caller on the line, press LINK.
- After you hear dial tone, dial the number.
- After you hear a ring, hang up.
OR, wait until the party answers, announce the caller, then press RLS to hang up.
OR, announce you would like to conference call, then press LINK a second time to connect all three parties.
Two
Line Conference
- Dial the first party on Line 1.
- After they answer, press CONFERENCE.
- Select Line 2 and dial the second party.
- After they answer, press CONFERENCE to join all three lines.
Call Pickup
*73
- Lift the handset and dial *73.
- You will intercept a call coming into another phone in your
Call Pickup Group.
TIP: If more than one line in the group is ringing, you will intercept the one that began to ring first.
Note: This feature must be set up through the OIT HelpDesk.
Distinctive Ring
*61
TO ACTIVATE/DEACTIVATE Distinctive Ring:
- Dial *61.
- Listen for message to know whether Distinctive Ring is on or off.
- If off, press 3 to turn it on. If on, press 3 to turn it
off.
TO ADD specific numbers to your list:
- Press *61.
- Press # and wait for the tone.
Dial the selected number.
- Press #.
- Wait 4 seconds and hang up.
TO REMOVE specific numbers from your list:
- Dial *61.
- Press #, and wait for the tone.
- Dial the selected number.
- Press #, wait 4 seconds, hang up.
TO ADD THE LAST incoming call to your list:
- After call, hang up and listen for dial tone.
- Press *61.
- Press #01#.
- Wait 4 seconds and hang up.
TIP: Distinctive Ring also works on long distance calls (where technologically possible.)
If you have call waiting, you can identify calls by the short/long/short tone.
Intercom
- Pick up the handset and press the button marked Intercom (I/C) or Group Intercom (GIC).
- Dial the two-digit intercom number.
Ring Again
*75
to activate
#75 to cancel
- After getting busy signal, hang up.
- Lift handset & dial *75.
- Wait for the recording, then hang up.
- Repeat Dialing will monitor the line for 30 minutes.
- A distinctive ring lets you know when the line you were calling is free.
TO CANCEL Repeat Dialing
- Dial #75.
- Repeat dialing will cancel automatically after 30 minutes.
TIP: Repeat Dialing can monitor more than one line at a time.
This will not work for telephone registration.
Return Call
*69 to activate*89 to cancel
- Lift the handset and listen for dial tone.
- Press *69. An automated voice will give the number of the last call received if it is not private.
- To call that number press 1. The call is made automatically. If the number is busy the feature will monitor the line for up to 30 minutes and signal with a distinctive ring when the line is free.
To cancel *89
- Lift handset and listen for dial tone.
- Press *89.
- Return call will deactivate automatically if you do not receive
a distinctive ring within 30 minutes.
Speed Call (Program Long, Program Short)
*77
(Speed Call Individual)
*78 (Speed Call Long)
Note: Feature must be set up through the OIT HelpDesk.
TO PROGRAM SPEED CALL:
- Lift the handset and dial *77 (for Speed Call Individual) or *78 (for Speed Call Long).
- After the tone, dial a one-digit code (0-9) for Speed Call Short or a two-digit code (00-29) for Long.
- Dial the phone number, exactly as you would normally dial
it (4-XXXX or 9-XXX-XXXX). Press the # key. After the tone, the
number has been saved and you can hang up.
TO USE SPEED CALL:
- Lift the handset and press *, followed by the one or two-digit
code.
Call Trace
*57
- Immediately after receiving a harassing phone call, hang up.
- Before receiving another incoming call, lift handset, dial *57.
NOTE: CALL TRACE is for harassing or threatening calls only. A police report must be filed.
Caller
ID (with number)
Available only with caller ID box (available through OTC).
Dialing Instructions
| Emergency | 911 |
| Auburn Police Department (Non-Emergency) |
9 + 501-3100 |
| Off Campus | 9 + Number |
| Long Distance | *76 + Authorization Code + 9 + 1 + Area Code + Number |
| Local Information | *76 + Authorization Code + 9 + 1 + 411 |
| Long Distance Information | *76 + Authorization Code + 9 + 1 + Area Code + 555 + 1212 |
| Voice Mail Access | 4-1000 on campus 844-1000 off campus |
International Calls
| Direct | *76 + Authorization Code + 9 + 011 + Country Code + City Code + Number |
| Operator Assisted - AU Calling Card only (by AU operator only) |
9 + 01 + Country + City + Number |
Last Updated: Jan. 22, 2011